Outline drawing

Customizable items: 1. Length and shape of the shaft; 2. Voltage, output speed, torque, etc. ; 3. Adding connectors, lead wires; 4. Adding gears to shaft; 5. Adding encoder.

The basic parameters are for reference

Gearbox sheet

Product Description 

IND-22GMP280 is a Micro 280 planetary gear motor built in a Ø22mm package with a 29.5mm body length. It runs from 2–14V DC and is intended for compact mechanisms that need speed reduction without moving to a larger frame size. For sourcing, use the reference table on this page: it provides sample operating points for ratios 4:1, 16:1, 64:1 and 542:1 with no‑load, on‑load and stall data. For mechanical design, ratio selection should be checked together with gearbox stage length. The gearbox sheet lists 14.4mm (1 stage), 17.9mm (2 stage), 21.4mm (3 stage) and 24.9mm (4 stage), which determines the available axial space in your bracket or housing. For integration, shaft length/shape, wire exit direction, lead length, connector/terminal and adding a pinion/gear are available by request.

FAQs 

Q1. How should we select the ratio for IND-22GMP280?

Start from the required output rpm and torque, then confirm the gearbox stage length from the gearbox sheet to ensure it fits your axial space. If the mechanism has end-stops or frequent start/stop, confirm duty cycle and consider current limiting to avoid extended stall operation.

Q2. Are the values in the performance table guaranteed for all builds?

They are reference values from sample configurations. Final performance depends on the working point (load torque, duty cycle, temperature, and driver control). For purchasing, we can align a specific configuration and test method for your acceptance criteria.

Q3. What can be customized for assembly and production?

Typical options include shaft length/shape, lead wire length, connector/terminal type, wire exit direction, adding a pinion/gear to the shaft, and encoder evaluation (subject to space and signal requirements).