♦ Basic Info:
Model: IND-12GMP12
Diameter: 12mm
Body Length: Customizable Length, please see alterable
Operating Voltage: 1V DC-14V DC
♦ Key Features:
♦ Alterable
Customizable items: 1. Length and shape of the shaft; 2. Voltage, output speed, torque, etc. ; 3. Adding connectors, lead wires; 4. Adding gears to shaft; 5. Adding encoder.
| Ratio | MPN | Voltage | No Load | On Load | Stall | ||||||||||
| Operating Range (V) | Rated Voltage(V) | Current (mA) | Speed (rpm) | Current (mA) | Speed (rpm) | Torque (Kg.cm) | Current (mA) | Torque (Kg.cm) | |||||||
| 4 | IND-12GMP1228-4 | 1.0-2.5 | 1.5 | 60 | 2500 | 100 | 2300 | 0.1 | 1300 | 0.21 | |||||
| 16 | IND-12GMP1228-16 | 1.5-5.0 | 3 | 50 | 625 | 90 | 500 | 0.1 | 1100 | 0.85 | |||||
| 64 | IND-12GMP1228-64 | 3.0-8.0 | 7.4 | 30 | 156 | 80 | 124 | 1.0 | 1000 | 29.8 | |||||
| 256 | IND-12GMP1228-256 | 8.0-14.0 | 12 | 50 | 39 | 80 | 27.5 | 1.2 | 900 | 102.3 | |||||
Notes: These specs are samples. Please contact us to customize your parameters.
Gearbox sheet
| Gear box length/L（mm） | Number of stage | Gear Ratios | |||||
| 13 | 1 | 1/4 | |||||
| 16 | 2 | 1/16 | |||||
| 19.5 | 3 | 1/64 | |||||
| 23 | 4 | 1/256 | |||||
IND-12GMP12 is a 12mm small planetary gear motor built from a coreless DC motor and a metal planetary gearbox. It is used when you need reduction in a tight envelope and you still want a predictable mechanical interface for production assembly. The operating range on this page is 1–14V DC, with common rated voltage selections 1.5V / 3V / 7.4V / 12V.
The gearbox is offered as fixed stage configurations shown in the gearbox sheet: 4:1 (1 stage, L=13mm), 16:1 (2 stage, L=16mm), 64:1 (3 stage, L=19.5mm), and 256:1 (4 stage, L=23mm). That stage length matters in real hardware, so we recommend choosing ratio and stage together based on available axial space, target output speed, and required torque.
The performance table on this page is reference data from sample builds. Final output depends on your working point (load torque, duty cycle, temperature, and driver control). For end-stop mechanisms, current limiting is recommended to avoid extended stall events.
For OEM builds we can supply shaft modifications, wiring/connector options, and evaluate encoder integration based on your layout.
Start from your target output speed and required torque, then check the gearbox stage length (L=13/16/19.5/23mm). Higher ratios reduce speed and increase available torque, but also increase stage length. If you share rpm/torque and duty cycle, we can recommend a working point.
They are reference values from sample builds. Final performance depends on the operating point and test conditions (load, duty cycle, temperature, driver control). For procurement, we can align a production test method and acceptance window based on your application.
Common items include shaft length/shape, lead length, connector/terminal type, polarity marking, and wire exit direction. Encoder integration can be evaluated if feedback is required, subject to space and signal constraints.
You need our support, and we are ready to provide assistance.
Motor products pose complexities in understanding, specifying, and integrating, with no industry standards. We offer expertise to mitigate design, manufacturing, and supply risks.
Contact our team now.
Download and view the full series catalog for free
You need our support, and we are ready to provide assistance.
You need our support, and we are ready to provide assistance.
Motor products pose complexities in understanding, specifying, and integrating, with no industry standards. We offer expertise to mitigate design, manufacturing, and supply risks.
Contact our team now.
