♦ Basic Info:
M10 (Ø10mm IND-10GMPM10) mini planetary gear motor with 171:1 planetary gearbox, 1–14V DC options and 11.8mm body length. Designed for compact actuators where stable torque and integration flexibility are required (smart locks, compact medical devices).
♦ Key Features:
♦ Applications:
Smart lock/ Medical
This M10 (10mm) planetary gear motor is designed for compact actuators requiring stable output torque in a limited envelope. Typical use cases include smart lock mechanisms (latch/bolt actuation, compact linkages) and compact medical devices where repeatable output and integration flexibility are prioritized.
If your mechanism includes hard end-stops, intermittent jamming, or high start/stop frequency, please share the duty cycle and control method. In most end-stop designs, driver current limiting is recommended to avoid extended operation near stall conditions and to improve long-term consistency.
To select the correct configuration efficiently, please provide the following purchasing inputs:
Target output speed (rpm) and required output torque (g·cm / mN·m, or force + lever radius)
Supply voltage range (battery discharge range if applicable) and any current limit
Duty cycle (on/off time per cycle) and expected daily cycles
End-stop condition (soft stop vs hard stop)
Output shaft requirement (preferred: mating-part drawing + tolerance)
Based on the above, we will recommend a suitable voltage/winding option and confirm a working point aligned to your load profile, rather than relying only on stall torque.
Customizable items: 1. Length and shape of the shaft; 2. Voltage, output speed, torque, etc. ; 3. Adding connectors, lead wires; 4. Adding encoder.
| Ratio | MPN | Voltage | No Load | On Load | Stall | ||||||||||
| Operating Range (V) | Rated Voltage
(V) |
Current
(mA) |
Speed
(rpm) |
Current
(mA) |
Speed
(rpm) |
Torque
(g.cm) |
Current
(mA) |
Torque
(g.cm) |
|||||||
| 171 | IND-10GMPM10-171-1.5 | 1.0-2.5 | 1.5 | 30 | 46 | 45 | 30 | 100 | 550 | 820 | |||||
| IND-10GMPM10-171-3 | 1.5-5.0 | 3 | 35 | 70 | 55 | 45 | 100 | 650 | 1360 | ||||||
| IND-10GMPM10-171-7.4 | 3.0-8.0 | 7.4 | 30 | 105 | 60 | 70 | 100 | 800 | 2000 | ||||||
| IND-10GMPM10-171-12 | 8.0-14.0 | 12 | 50 | 135 | 70 | 150 | 100 | 1500 | 2560 | ||||||
Notes: These specs are samples. Please contact us to customize your parameters.
Gearbox sheet
| Gear box length/L（mm） | Number of stage | Gear Ratios | |||||
| 7 | 1 | 1/171 | |||||
Yes. This type of motor is commonly used in compact lock actuators. For hard end-stops, we recommend current limiting in the driver and duty-cycle validation to prevent prolonged stall operation and to improve consistency in production use.
Yes. Shaft length and shaft style can be customized (e.g., round, D-shaft, threaded, or press-fit pinion). Please provide your mating-part drawing and tolerance requirement so we can confirm feasibility and the recommended fit.
Please share target rpm, required torque (or force + lever radius), voltage range, duty cycle, end-stop behavior, and wiring/connector requirements. With these inputs, we can recommend a configuration and provide a sample specification suitable for your assembly and incoming inspection process.
You need our support, and we are ready to provide assistance.
Motor products pose complexities in understanding, specifying, and integrating, with no industry standards. We offer expertise to mitigate design, manufacturing, and supply risks.
Contact our team now.
Download and view the full series catalog for free
You need our support, and we are ready to provide assistance.
You need our support, and we are ready to provide assistance.
Motor products pose complexities in understanding, specifying, and integrating, with no industry standards. We offer expertise to mitigate design, manufacturing, and supply risks.
Contact our team now.
