♦ Basic Info:
This N10 brushed DC planetary gear motor (Ø10mm IND-10GMPN10) integrates a brushed DC motor with a compact planetary gearhead to deliver stable output torque in a small envelope. Standard supply options include 1.5V / 3V / 12V (within 1–14V DC operating range), suitable for compact actuator modules.
♦ Key Features:
♦ Applications:
Cleaning equipment/ Smart lock/ Armarium
This N10 planetary gear motor is used in compact mechanisms that need speed reduction and stable torque output, such as:
If the mechanism includes end-stops or intermittent jamming, driver current limiting is recommended to avoid extended stall operation and improve long-term consistency.
To receive a comparable quote and correct samples, please provide:
Target output speed (rpm) and required output torque (g·cm / mN·m, or force + lever radius)
Supply voltage range (1.5V / 3V / 12V) and any current limit in the driver
Duty cycle (on/off time per cycle) and expected daily cycles
End-stop behavior (soft stop vs hard stop)
Output shaft requirement (preferred: mating-part drawing + tolerance)
Based on the above, we recommend a working point aligned to your load profile rather than selecting only by stall torque.
Customizable items: 1. Length and shape of the shaft; 2. Voltage, output speed, torque, etc. ; 3. Adding connectors, lead wires; 4. Adding gears to shaft; 5. Adding encoder.
| Ratio | MPN | Voltage | No Load | On Load | Stall | ||||||||||
| Operating Range (V) | Rated Voltage(V) | Current (mA) | Speed (rpm) | Current (mA) | Speed (rpm) | Torque (g.cm) | Current (mA) | Torque (g.cm) | |||||||
| 120 | IND-10GMPN10-120-1.5 | 1.0-2.5 | 1.5 | 45 | 66 | 80 | 46 | 100 | 650 | 950 | |||||
| IND-10GMPN10-120-3.0 | 1.5-5.0 | 3 | 50 | 92 | 90 | 64 | 100 | 1200 | 1200 | ||||||
| IND-10GMPN10-120-7.4 | 3.0-8.0 | 7.4 | 50 | 125 | 90 | 87.5 | 100 | 1500 | 1500 | ||||||
| IND-10GMPN10-120-12 | 8.0-14.0 | 12 | 50 | 208 | 70 | 145 | 100 | 2300 | 2570 | ||||||
Notes: These specs are samples. Please contact us to customize your parameters.
Gearbox sheet
| Gear box length/L（mm） | Number of stage | Gear Ratios | |||||
| 7 | 1 | 120:1 | |||||
This N10 brushed DC planetary gear motor can be configured for production builds with:
Shaft length and shaft style (round, D-shaft, threaded, press-fit pinion; per drawing review)
Lead wire length, wire gauge, polarity marking
Connector/terminal type and wire exit direction
Encoder addition (subject to space and signal requirement)
Speed/torque targeting via motor winding and planetary ratio selection
It means a Ø10mm brushed DC motor is assembled with a planetary reduction gearhead as one unit. The planetary gearhead reduces speed and increases available output torque, enabling compact actuators to drive loads that direct-drive motors cannot handle reliably.
Select based on your power supply range and driver constraints first, then match the required output rpm/torque and duty cycle. For mechanisms with end-stops, current limiting is recommended to prevent extended stall operation and to improve repeatability in production use.
Yes. Shaft length/style, lead length, connector/terminal type, polarity marking, and wire exit direction can be configured. Encoder addition can be evaluated depending on available space and your signal/output requirements.
You need our support, and we are ready to provide assistance.
Motor products pose complexities in understanding, specifying, and integrating, with no industry standards. We offer expertise to mitigate design, manufacturing, and supply risks.
Contact our team now.
Download and view the full series catalog for free
You need our support, and we are ready to provide assistance.
You need our support, and we are ready to provide assistance.
Motor products pose complexities in understanding, specifying, and integrating, with no industry standards. We offer expertise to mitigate design, manufacturing, and supply risks.
Contact our team now.
